The Saronni Goodwood Super confirmed

1982 Colnago Super ‘Profil’ , Goodwood ‘82 World Champion Beppe Saronni bike.

(Photo author , at La Collezione private preview , 12/22)

A while back a bicycle enthusiast contacted me for Colnago information , stating he was writing an article , and wanted to link to my site (here). I refused, deciding it was plagiaristic and lazy.

Following one post which was written in 2020 and completely misleading, with false information, and seeing the writer choose to reference me , I sent confirmation of what Colnago stated the bike that won Goodwood is on their official Facebook page in 2021 .

The writer did not correct the misleading article once made aware, so it will now be addressed properly here.

“SARONNI’S 1982 WORLD CHAMPIONSHIP BIKE CONFIRMED “


Part of this confusion can be attributed to a sign that is attached to Saronni’s bike in the Colnago museum that says ‘SUPER – Acciaio’ which translates as ‘SUPER – Steel’. However, if you visit the Colnago website ‘Hall of Fame’ page, you will see Saronni’s 1982 World Championship bike with a caption saying he won this race on a Mexico. These two pieces of information are conflicting.

So I emailed Colnago with the question: Which bike was it, a Super (Profil) or Nuovo Mexico? I received a reply from Colnago’s Chief Press Officer advising that Saronni’s bike was a ‘New Mexico’, the website it correct, the placard in the museum was incorrect. So ‘case closed’ – you would expect.

However, I was recently contacted by a vintage bike enthusiast (refer comments section below) whom has written a long article discussing this same topic. The premise of his article contradicts the information presented on Colango’s website. The author states that he has confirmed with Mr. Alex Colnago and Mr. Saronni that the bike used to win these world championships was definitely a Super – that featured crimped tubes.

So, like you, I’m a bit puzzled as I would expect Colnago to be an authoritative source about their own cycling history?”

(Quote “Rouler” , author Cycling Obsession)

Well , the writer has no contact with the Colnago family , and never met Saronni to ask him .

Soon after , the official Colnago Goodwood info was posted …

https://m.facebook.com/story.php?story_fbid=pfbid02JKpnS5Co5hWCKD7Jg3BJppRKZjpu8RX5aqZuooxqVPf4b8BUxV2LXTWsJkG8tpRcl&id=368678269130

The author posts a renovation thread , the only one on the whole site , re. a 1st gen circa ‘83/84 Nuovo Mexico , again with misleading info…

“The Nuovo Mexico is widely associated with Giuseppe (Beppe) Saronni and his successful Del Tongo team who raced on Colnago bikes. The Nuovo Mexico was no doubt instrumental in some of his victories which include the 1983 Giro d’Italia and Milan-San Rem”

As the above Colnago social media post states , Sarroni won the 83 Giro on a Super Profil.

Regarding “contradicts information”, one can find more misinformation on the authors site , eg, the C40 .

The first edition C40 had completely round tubes. As seen on one of the examples I owned….

https://www.flickr.com/gp/58441410@N04/D90M812jUo

Here in the writers article, he completely dismisses this as the first version C40 , simply because he hasn’t seen one ‘in the flesh’, or the correct catalogue …

“Colnago C40 Prototype (pre-1994)

When researching the C40 on the internet, there is mention of an earlier carbon lugged frame with round carbon tubes rather than the Master profile tubes usually found on the C40. However, I decided to only include C40 frames in this article that were listed in the Colnago catalogs and were therefore widely available to the general public.”

Quite arrogant to try and re write the history of one of the most iconic carbon racebikes .

Because of the authors lack of grasp of truth, one has to question his whole site . Titled as this…

“COLNAGO C40 – THE ULTIMATE GUIDE”

It clearly is not , it’s just an opinion of the C40 .

Colnago Master MTB Custom Project

This is quite something,

An mtb frameset with lugging and Gilco tubing

The picture is from the return journey after collecting.

Factory fitted with full Shimano Deore XT,the  frame is in remarkable condition, bar a few paint chips.

(catalog picture of an ’80’s Master MTB)

I just received some NOS Campagnolo 8 speed bullet shifters, and Rigida dp 22 rims (for summer wheels)

I couldn’t resist taking it out in the snow

I’m really impressed with the current group, vintage  Shimano Deore XT , performed faultlessly,

still going for Campagnolo though

I managed to find these Campagnolo MTB toecages

I took two trains and two buses

each way to collect, but I had a good result,

a practically nos Campagnolo Olympus MTB FULL GROUPSET!!!!!

just look at the derailleur guard !

I stripped the frame and

I cleaned the frameset up and added a couple of paint touch ups.

the transformation from  ‘Freak’ to ‘Unique’ has begun

here’s the refurbished frame…

041

050

039

047

045

048

051

052

005

006

003

002

021

022

just needs the bullet shifters wired up..

9325831251_4403193d66_z

finished…

003

017

011

013

014

010

015

012

018

036

I found  set of nos Tioga Psycho tyres, so I borrowed the wheelset from The Next Machine, (Campagnolo O R on Mavic SUP Ceramic rims) until I finish building a set with Campagnolo rims and Olympus MTB hubs..

001

004

005

006

007

008